Bowflex Ultimate 2杯垫架

Bowflex Ultimate 2 Cup Holder

2024-01-09 21:37:23

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I wanted a cup holder for my Bowflex Ultimate 2, so I made one. It also can hold a towel but that was unintentional and may be less than ideal. Edges a smoothed for safety. This holder easily holds my shaker cups. You will have to drill holes into the faceplate of your unit to mount this. The placement in the pictures does not interfere with the function of the device. In fact, I found that it acts as a support for my back during lateral rasies and similar exercises. It ensures that I do not lean back onto the face plate which was throwing my technique off.

Also note that the mounting distance from the phone holder does allow for the shaker bottle to be easily inserted and removed without constraint. Be careful of that distance if you are replicating my configuration.

Print Settings

Printer brand:
Anycubic
Printer:
Kobra Max
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
%
Filament brand:
Anycubic
Filament color:
Grey
Filament material:
PLA

Post-Printing

I drilled out the screw holes using a 1/16" drill bit to ensure that the walls of the screw holes nor the walls of the device would split when screws were in place.

I believe I used 1/8" screws. #8 robinson screws should also work well.