Adderlink XDIP VESA接口模块

Adderlink XDIP VESA mount with EtherCON

2024-01-09 22:22:12

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a mount for the adderlink XDIP series of IP KVM converters to allow it to be securely mounted on the rear of a monitor and collected with an ethercon jack using a standard Neutrik Ethercon coupler.

This setup is commonly used on live productions and tours as a quick way to add an additional portable control or programming console to a rig.

Post-Printing

Requires:

4x M4x8mm Countersunk bolts for mounting to the monitor
4x M3x10mm Countersunk bolts for mounting the XDIP
4x 3.0x25mm Countersunk screws for clamping down the ethercon barrel
1x 300mm CAT5E patch cable to connect the XDIP to Ethercon, Higher grades of cable may not fit in the cable channel.