滑动门

Sliding Door

2024-01-10 03:16:59

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

抖音私信 @jobsfan

dd a touch of realism by adding a sliding door to your diorama or gaming table.

Each object is modelled 1-in-10 scale. You will need to rescale the model to suit your application. I printed mine at 130% (for about 1-in-8 scale).

Print with the objects parallel with the print bed. For filament printers, use at least 20% infill, a brim and supports where required.

After printing:

Paint the components.
Find four bearings and shafts that will fit into the pelmet.
Drill holes in the top of the door for the bearing shafts. Cut the shafts to a suitable length, insert into the drilled holes and press the bearings onto the shafts. Use retaining compound (i.e. Loctite, Superglue). I did not model the holes, as the position and size will be determined by the bearings and shafts that you select.
Insert the door assembly into the main channel and check for smooth rolling.
Attach the end piece. I used double-sided tape.
Attach the pelmet to the wall. I initially used double-sided tape, however, I ended using epoxy resin.