AR 增强现实壁挂架

AR Wall Rack

2024-01-10 10:47:38

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

AR15 Wall Rack

Ability to add cable lock via slot in back of base.

Adjustable. Using set screw.

Parts needed:
(1) rod. 7mm (Arrow Shaft, Carriage Bolt, Round Stock) 100-200mm length...depending on AR.
(12) Drywall / Decking type screws. 2" Aggressive thread pitch. I used stainless steel screws I found. Kreg pocket screws you can find at Lowes may also be a good option. You'll figure it out.

Drill 1/8" (.125mm) in rod end so that the 2" screw will lock the peg in place.
Drill 1/8" (.125mm) in rod side (see pilot hole) and use 2" screw to lock rod at proper length.

Found that 50% infill and 10 walls worked good for PLA. Long print time. Other stronger materials can scale back infill and walls and time.

Print flat for strength.