世界翻转者变形装置立方体 - 旋转/活跃状态

World Flipper Alter Device Cube - Spinning/Active

2024-01-11 02:18:51

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A cube used by Nephtim and Sotieth in the game World Flipper by Cygames. It is shown in attack mode with laser emitters at the ready and able to be spun open diagonally like in the game.
It is a smooth, slightly loose spin, so do not count on it holding its...pose, I guess(?) perfectly but a tiny bit of glue or something could easily solve this.

This was one of my first creations, and it is not quite perfect, but as seen in the pictures, it is really good. I'm happy, but may eventually do another. Lmk in the comments if you would really like a new version of this! Happy Flipping!

For the eye, I used Anaroth's "Zelda coin" found here: https://www.thingiverse.com/thing:2537301

I take no credit for the design of this cube. All rights to Cygames and partners on the WF team. I built this cube on Tinkercad as close as I could to their design.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 V2 Neo
Rafts:
No
Supports:
Yes
Notes:
Mine is 20mm. I would NOT go smaller because support between the slices needs to be relatively thin. It will get worn down as it turns. I wouldn't go much bigger either because the gaps will be very large. I used the corner of my scraper tool to chip out the support carefully. I scarred my thumb, so be careful! :)