Curtain挂钩3D模型
Curtain hanger
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Curtain hanger with rollers used in extruded curtain rails.
Print the hooks first, then print the rollers up to 6.6 mm by pausing the print. Put the hooks on the rollers, make sure that none of the hooks are pointing up and above the current layer. Resume the print.
When slicing the rollers, keep in mind that you will need space to place the hooks.
The end of the hook can be pushed into a locked position so it sort-of secures whats in it.
I used PETG, anything that is not too stiff could work.
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3
- Rafts:No
- Supports:No
- Resolution:0.2
- Infill:None
- Filament brand:
-
- Filament color:
-
- Filament material:
PETG
- Notes:
For both print: no top, no bottom, no gap fill, no brim, turn arachne on if possible.
Hook: 2 perimeters (extrusion width:~0.45)
Roller: 3 perimeters (extrusion width:~0.45)
License
Curtain hanger
by feketeimre is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
相关内容
联系我们
热门推荐
-
Quadlock 弹出式插槽 - 配有通用安装板2023-03-26 -
手机和平板支架套装2024-03-17 -
Panasonic Lumix GX8 前置旋转环2024-03-21 -
业余无线电爱好者 - 线绕装置 / EFHW 统计装置2024-04-10 -
抽屉分隔盒，香料瓶收纳架2024-05-06
最热下载
-
可定制像素珠子照片面板2023-03-26 -
Glock 17/34 Solidworks 模型文件2023-04-21 -
GLOCK 17（第三代）蓝枪2024-04-13 -
GTA 5 大地图模型2024-04-21 -
克利普施 Promedia 2.1音量Pod模拟机器架（铝制支架）安装基座2024-04-29
最新模型
-
hgx挤出机头火炮响尾蛇 X3 SWX3 HGX lite 2.002025-07-18 -
高跟鞋鞋架2025-07-17 -
女式凉鞋2025-07-16 -
关节活动人，假人13,Dummy 132025-07-02 -
锅盖收纳锅盖放置挂钩-能防止12cm到32cm尺寸的锅盖2025-06-24