Curtain Hanger

2024-01-16 23:55:54

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This project provides the easy changing of three (3) curtains or photography backdrops. To change a curtain rod, it is suggested to leave one of the four hooks open and use it to change from one rod to another. Once a rod has been moved, carefully fold the curtain that was previously in front and drop it behind the new curtain.

These hangers are good for storing unused backdrops and easy changing without removal.

Print Settings

Printer brand:
Anycubic
Printer:
Kobra 2 Max
Rafts:
No
Supports:
Yes
Resolution:
0.24
Infill:
15%
Filament brand:
Overture
Filament color:
Black
Filament material:
PLA Pro
Notes:
PLA can be used or any other filament, like ABS or PETG. With my settings, each hanger weighs 2.1 lbs. Mine are on drywall, not studs, and have anchors with a 50-pound capacity each.

I did not perform much post-processing other than removing supports, light sanding, and spraying with Rustoleum black paint.

A diagram has been uploaded with measurements.