密尔瓦基 Packout 深度容器矩形分隔

Milwaukee Packout Deep Container Rectangle Divider

2024-01-11 06:19:08

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

These dividers seperate the larger deep rectangular Milwaukee Packout container across corner to corner. Very helpful for getting twice as many items into your packout. Works well for lots of different items like screws, anchors, nuts and bolts, connectors, etc. There is still enough room on each side to get your fingers in to pick up whats inside. The piece is modelled to match the contours of the container exactly and to have the lid touch the top of it when the pack out is closed so that no parts will slip underneath. They have a slightly tight fit so they stay in place and don't pop up and allow your parts to mix when you have the packout opened.

For my divider design for the smaller square containers, look here: https://www.thingiverse.com/thing:5409228