沃尔沃XC60磁铁安全装置

Volvo XC60 Magsafe Holder

2024-01-11 13:13:30

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

The magsafe is a decently tight fit, but I would still advise to use really thin tape underneath it keep it held down. Like scotch double side tape or scrap book tape. I used thin tape from an adhesive tape dispenser for like envelope sealing.

History on Creating It
Got sick of my XC60's wireless charger not charging my phone with big cases or the phone getting absurdly hot. Seems its a common problem and Volvo doesnt even sell cars with wireless chargers anymore evidently.

So I figured out how to make use of the "sliding track" for the wood cover to make a bracket to shove a magsafe charger in its place with 3d printed parts.

I did it this way because my car is a lease and its up in June so there is no adhesive on the car parts to leave a mess or issues. I ended up making clips that wedge into the groove then click into the magsafe bracket.

Currently the magsafe just gets held in via pressure from 3d printing it precisely but it still comes up sometimes so I am going to add seom very thin "glue runner" adhesive from a dispenser such as the type for "white out rollers". It should make it sticky enough and not ruin the whole slimness vibe I tried for.

Print Settings

Printer brand:
ELEGOO
Printer:
ELEGOO NEPTUNE 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20
Notes:
I would probably print this in PETG, I did PLA because that all I ever use but PETG should be better in the car to deal with warping. But the way I designed it even it things warp things should be held together fine.