小型电压计仪器箱，配备按钮开关

Small Voltmeter enclosure with a button switch

2024-01-11 13:13:30

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

小型电压计仪器箱，配备按钮开关

小型电压计仪器箱，配备按钮开关

Summary

This design for those who want a cheap voltmeter mounted close to the battery, to quickly verify its condition

Voltmeter can be purchased at:

https://www.temu.com/goods.html?_bg_fs=1&goods_id=601099521560300&_x_sessn_id=0xywguna4b&refer_page_name=bgt_order_detail&refer_page_id=10045_1704945208201_lgvnxhont4&refer_page_sn=10045

4 plastic legs are too long, so cut them off. Voltmeter dimensions under the panel 45.5x26.15mm.

Button switch can be taken from an old monitor or any dead gadget.

Voltmeter cable should be pushed thru to the small compartment then red wire cut and soldered to two pins on a switch that connect when button pressed.
When that done push the remaining wire thru the opening for connecting to the source
The button is needed, as Voltmeter consumes 8-16mA, which can discharge your battery if left always on.
Good Luck!

小型电压计仪器箱，配备按钮开关

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

最新模型

最热下载

Smart Pistol Kit for Airsoft ICS BLE XAE (Titanfall 2) (Tracer Unit Cover)
2023-03-26
1:144 比例星际飞船模型
2023-03-26
参数化的两部分模具生成器（用于OpenSCAD）
2023-03-26
红米手表4号充电基座
2024-03-15
Enders 3版控制面板
2024-05-08