HY-111 DS1307 I2C RTC模块的基础板安装支架

Base plate mount for HY-111 DS1307 I2C RTC module

2024-01-12 01:07:10

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

HY-111 DS1307 I2C RTC模块的基础板安装支架

HY-111 DS1307 I2C RTC模块的基础板安装支架

Summary

I needed to mount a DS1307 HY-111 RTC module so I designed this base plate.

Just use M3 screws, the holes are slightly undersized, so the threads will "bite" into the plastic and hold everything in place.

This base plate can be used standalone, or glued. You can also mod it as you need, I provided the OpenSCAD source code, everything is parametric.

NOTE as a reminder: If you plan to use a CR2032 battery with these HY-111 modules, do not forget to remove D1 and R4, and to short R6.

You might need to adjust the diameter of the screw holes to get a proper fit, depending on your printer and print material.

Printed in PLA, works fine for me

Print Settings

Printer brand:
Creality
Printer:
Ender 2
Rafts:
No
Supports:
No
Resolution:
0.3
Infill:
100%
Filament brand:
Inland
Filament color:
Red
Filament material:
PLA
Notes:
Make sure your settings result in 100% infill

Tags

License

BSD-2-Clause

Base plate mount for HY-111 DS1307 I2C RTC module
by uski is licensed under the BSD License license.

HY-111 DS1307 I2C RTC模块的基础板安装支架

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

Goblin Wizard [Pre-Supported]
2023-05-15
智能药盒：Doliprane 1000 3D模型
2023-07-25
空气质量监测立方体六边形设计，监测二氧化碳、相对湿度和温度。
2024-01-16
墨鱼包皮带扣
2024-04-13
Ikea 米兹顿插嵌
2024-04-20

最热下载

最新模型