Ender 3 V1/V2/Pro版双Z功率供电支持

Ender 3 V1,V2,Pro Dual Z Power Supply Support

2024-01-12 07:16:36

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

When adding dual Z lead screws to the Ender 3 V1, Pro, V2. The Power Supply (PS) must be unbolted from the Z axis frame and attached to the lower frame with a plate. this allows the PS to vibrate on the X axis when can create/add "ringing" to your prints. This support bracket clips on top of the right hand lead screw bearing and the top of the PS and keeps it stable. I added a little blue painters tape to keep the bracket in place yet is not needed. If you have added a PS fan shroud, simply trim the bracket some to allow clearance. I am going to remove the PS fan shroud from mine as IMO it's really cuts/slows down the air flow