三星 S-Pen Pro 笔尖保护膜

Samsung S-Pen Pro Tip Protector

2024-01-12 07:59:11

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a remix of BrokenPoet's S-Pen tip protector so that it protects a Samsung S-Pen Pro. It will fit snugly at the default settings. File it down if it's too snug.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 S1 Pro
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.12
Infill:
30%
Filament brand:
Inland (Microcenter)
Filament color:
Gray
Filament material:
PLA Pro
Notes:
- I printed mine at 0.12mm layer height, but this could be printed with 0.2 with no issues.
- Printed at 40mm/s with 1500mm/s acceleration.
- No raft or build plate adhesion since I used a bed glue to keep it on.
- Retraction enabled.
- 0.4mm nozzle
To remove the seam down the side, change the Cura Wall setting "Z Seam Assignment" to Random.