45度卫生纸架

45° Toilet paper holder

2024-01-13 05:26:08

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Simple holder for toilet paper roll.
Handy when space is limited and there's no place to put regular paper holder.

Prints in 3 parts.
Middle part slides out top for refills.
2 holder pieces are designed, one with paper icon and another is blank.
Make sure to mirror pieces if different arrangement is required.

Hardware required:

3m double stick tape any width (can be stacked or cut as needed), 1mm or aboth thickness is expected, otherwise will need to double stack to achive necessary thickness

Print Settings

Printer brand:
Creality
Printer:
Ender-3 S1
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
10% and up
Filament brand:
Creality
Filament color:
Black
Filament material:
PLA
Notes:
holders_roll designed to print on single plate.
Should work from 200mm squared.

No support is needed, however roll part came out stairstepped on the underside, so to improve finish it can be added.

0.4 nozzle diameter is preferred for snuggle fit.
I've printed at 0.2 layer height, however since this is very utility focused item, larger layers can be used.

Post-Printing

Mounting

After printing 3m double stick tape is applied to inbuild recesses on the holder pieces.
Use xacto knife to trim excess tape by using inset recesses as a guide.

After applying both pieces of tape, combine into single assembly and press firmly into desider corner.

Resulting adhesion is more than enough for single roll of paper. Since both holders and pinned by roller support resulting assembly is relatively sturdy.