漂浮圆形卫生纸架

Floating Round Toilet Paper Shelf

2024-01-09 03:29:57

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Since I have made a towel rack design and floating shelves, I thought I might as well make one for toilet paper.

Here is my round floating shelf:
https://www.thingiverse.com/thing:5627085
Here is my original towel rack
https://www.thingiverse.com/thing:5399009

These are single screw mounts. One has a slightly flat back for those who wish for it to sit a bit more snug and one is rounded.

This holds a roll sized 120mm in diameter. If you would like a larger version, please let me know, I am happy to add it. I just tried to do this based on the averages

I did not design this for the toilet paper to stay on the pole and you pull it off, but the boss told me it made sense like that. So, you could pull the roll off for usage or leave it on. The stem in the middle will reach around 75-80% up the roll. Some rolls are different in sizes.

I recommend printing the wall mount at 70% plus infill. This will help with screwing it tightly to the wall. I have printed mine at 90%.

For the floating shelf, you can print this at 20% infill no problem.

DISCLAIMER: This is not meant to hold a lot of weight!