牙刷与牙膏盒
Toothbrush/Paste Holder
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
IF YOU CAN, PLEASE DOWNLOAD, MAKE AND COMMENT ON THIS MODEL ON PRINTABLES. IT SUPPORTS ME AT NO COST TO YOU.
A toothbrush and toothpaste holder. You most likely will need to print it in multiple parts then snap all of them together. You will need to print 4 poles. I recommend printing the poles upside down one at a time with 0% infill and no brim to keep it round, but you may need to change your settings as they falls of easily. After printing, you can insert both poles into each side of the rings sideways and then rotate them so that they can fit into the base.
You can find this model on Printables at https://www.printables.com/model/721168-toothbrushpaste-holder
Print Settings
- Printer brand:
Sovol 3D
- Printer:
Sovol SV06
- Rafts:No
- Supports:No
- Resolution:0.2
- Infill:100% On everything but poles, 0% on poles
- Filament brand:
Esun
- Filament color:
Black
- Filament material:
PLA
- Notes:
I recommend printing the poles upside-down with the curve on the bottom.
Tags
License
Toothbrush/Paste Holder
by JoeyAW is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
联系我们
热门推荐
-
This is Fine, 狗的重制版2025-06-24 -
2023年度EDC手镯饰品2023-05-10 -
Peugeot 2008 iPhone Magsafe Holder2023-06-19 -
CPAP导管和面罩架2024-02-04 -
双面芯片夹2024-04-22
最热下载
-
未识别十字架006A，可嵌入盒（v2）2023-03-26 -
开源 1:10 四驱竞技型 RC 车2025-07-08 -
生态FLOW EcoFlow Wave 2风扇系列,EcoFlow Wave 2通风口2024-02-05 -
幻想磁力2024-05-03 -
用于Raspberry Pi高质量摄像头的D型安装适配器2024-05-08
最新模型
-
FLsun SR HGX Bambu直接驱动挤出机2025-07-18 -
Trojan T-28 (2-meter) 软轮胎 3D模型2024-05-08 -
婴儿摇椅2024-05-06 -
镀铬保险杠防护罩套件适用于大众汽车2024-05-06 -
Mk2冷液泄漏散热器夹具2024-05-06