美国海军潜水员头盔

US Navy Diving Helmet

2023-03-26 17:51:07

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

我曾制作了一个Mk.V美国海军潜水员头盔的假发，用于一个万圣节派对。头盔本身（球冠和颈部片）使用了EVA泡沫材料。最好的选择是将整个头盔刷成铜色，然后用银色刷漆处理缝隙，以模拟焊接效果。我在窗户上使用了反光贴膜，使其看起来更加诡异。

它需要一些螺丝和螺母来制作关节，并以真实的方式呈现。前窗口的大翼螺栓也是不错的选择，但我当时没有时间去找一枚。

I used the adjustment knob on the front to adjust a speed controller for an internal fan, pumping air in through the two hose connectors at the rear to keep myself from suffocating. It gets very stuffy inside, and ventilation is definitely needed. Don't build this without active ventilation!

The main head dome is 270mm in outside diameter, and the neck connection is about 220mm diameter. I've included a .STEP file of my original drawing, and a pair of .STL files of the dome and collar, but these are untested and I can't vouch for them.

I have also quickly created a DXF foam pattern for the EVA foam. When I made mine I did it more or less by eye, so I can't say this pattern is perfect, but it should be a good jumping off point. Use contact adhesive, and good luck!

美国海军潜水员头盔

朋友，你觉得上面这个模型，属于下面的哪个分类？