钣工指南：碳纤维复合材料叉杆制作技术

SAW GUIDE FOR CARBON COMPOSITE FORKS

2024-01-14 19:36:16

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This model is copy of Park tools overpriced saw cutting guide. There is main M8 bolt for tighting down the tube (You can use any M8 bolt you want if you dont trust plastic bolts just dont puncture your carbon tube :D). To connect Part 1 and 2 with spacer part I used brass inserts M3 with two M3 bolts (there are alredy modeled holes). To get best result with Part 1 thread i recommend printing it so the thread touches heatbed (this way no supports are needed with egg shape pointing upwards).

If bolt at 100% size does not fit you can try scaling down X and Y axes to 90 - 95 % (dont forget do disable uniform scaling so Z axes stays the same).