可修改装备箱

Modifiable Deckbox

2024-01-15 01:10:41

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I felt like designing a deckbox with sides that can be swapped out for customization purposes. You can put in side panels with different decorations and colors to show what's in the box at a glance, or print panels with you name on them for public events. The back and side panels are meant to have designs and stencils extruded into them. The end of the panels with the protrusions are the bottoms. The panels are 1.8mm thick. I would recommend engraving designs 1mm deep, or 0.8mm from the floor, but do whatever works for you.
I imagine others have already made similar designs, and probably better. But oh well.

I am happy with the design, but if you want to change it up, there is room for improvement:
-The magnet-free lid could have some more cutouts so you can see more of the decorations on the panels.
-Maybe the magnet-free lid could be made taller with decorations on the outside. I made he lid taller for added grip strength, but it's still not enough to support a full box.
-The magnet setup could use larger and/or stronger magnets. I used 6mm x 1mm Neodynium magnets with about 0.96 lbs of pull force because that's what I had, but stronger magnets would help. If they're strong enough, they can be installed into the supporting walls of the frame instead of in the side panels.

Print Settings

Printer brand:
ELEGOO
Printer:
ELEGOO NEPTUNE 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
15
Filament brand:
Elegoo
Filament color:
black
Filament material:
PLA
Notes:
Supports are necessary for the main frame, but not the smaller parts. I print with lower density for ease of removal.