Traxxas Thumb Steer

2024-01-15 04:03:44

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Needed a thumb steer so I can drive RC cars one handed while walking dogs or catching Pokemon. Remixed this from Loudtechryan. Just needed wheel diameter smaller and longer to match my Traxxas remote sponge grip and also needed the thumb steer extended for my smaller hands. The adjustment knobs on the remote got in the way of my thumb so i opened my remote and took those knobs off. It really helped. Imported this to Bambu studio and printed with tree supports and mag wheel facing up. To make the wheel silver i colored it by layers on just the rim section but only enough so the mag face looks silver to save in wasted filament. This also colored the top layers of the thumb control silver so then i painted that black so now only the wheel had silver. I am an old fart and literally a month into owning my first 3d printer and learning to use Tinker cad so my apologies if it looks rough. I made dozens of iterations before i was satisfied and it shows in the lines around the mag wheel but it ok as the sponge covers all that up.

Print Settings

Printer brand:
Bambulabs
Printer:
Bambu P1S
Rafts:
No
Supports:
Yes
Filament brand:
Bambu
Filament color:
Black and Silver
Filament material:
PLA
Notes:
Tree supports seemed easier to remove then the regular supports especially within the tiny screw hole that is under the wheel. If the upper most part of the screw hole had been cone shaped on the inside then it may have not needed a support withing the screw hole. I didn't bother changing that though.