Traxxas TQI 手机支架（胶粘安装）

Traxxas TQI Phone Mount (Glue on)

2024-04-03 06:48:28

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a phone mount I designed to be glued on my Traxxas TQI transmitter. It will need to be assembled with the hardware listed below and attached to the controller. I used some e6000 to glue mine on and it works well. I also have made a few slight changes since I printed the one in the pictures, so if something doesn't work, leave a comment. (The phone case in the pictures is just thrown in there to show that it fits an iPhone 13 with a larger case)

Required:
2 x Rubber Bands

1 x M4 * 20 bolt

1 x M4 washer

1 x M4 nut

2 x M5 * 16 bolts

2 x M5 * 12 bolts

4 x M5 washer

5 x M5 nuts

Assembly Instructions:
Every bolt is a button head bolt with a washer on the back side with the nut. The two M5 x 12 bolts will go through the clamp mount and the bottom of the phone clamp to attach them. Then the single M4 screw will go through the hinge between the swivel and clamp. The other two bolt holes are for the M5 x 16 bolts with the one on the back of the phone clamp having two nuts(one for a jam nut) unless you have a locknut. The rubber band sits in the slots on the back.

Print Settings

Printer brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2 mm
Infill:
100%
Filament brand:
Kingroon
Filament material:
PLA
Notes:
I printed mine at 100% concentric infill and have had no issues about things wanting to break. You could probably get away with less, but I wanted a more robust mount.