Nintendo 3DS 游戏卡盒

Nintendo 3ds cartridge case with TPU hinge

2024-01-15 06:27:22

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A case for game cartridges of the Nindendo 3ds.

Top and bottom can be printed in any desired material, but i would recommend printing it with transparent filament to make it easier to see wich game is in the case. I used the settings explained in this video by CNC Kitchen( https://youtu.be/9qb25Gi4Jv0 ). Due to my textured buildplate the results didn´t come out perfectly clear, but clear enough to tell wich game is in the case.

The hinge was designed to work with TPU 95A but filament with lower shore hardness should also work fine.

For assembly the hinge needs to be pressed into the two pieces of the case. If the fit is too loose, it might be necessary to scale up the hinge in your slicer to ensure it stays in place when using the case.

*The current image does not represent the current model. Its just to show the general functionality. The updated image with the current model will be uploaded tomorrow.