Nintendo Switch Lite 旅行箱

Nintendo Switch Lite Travel Case

2024-04-04 22:50:50

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

---This carrying case is meant for a Nintendo Switch Lite---

The carrying case can use up to 4 latches. You can use either 2 or 4. You can also insert 2 official Nintendo Switch 4 Game Cartridge Holders in the lid of the case.

I've included a couple of test prints for you to test the latches and the cartridge holders, before any large prints.

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

3D Printed Part List:

1x Carrying Case Top
1x Carrying Case Bottom

Per Latch:
1x Top Latch
1x Bottom Latch
1x Nutted Coupler
1x Loose Coupler
1x Nutted Crank
1x Loose Crank

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

Non-3D Printed Part List:

Per Latch:
2x M2x20 (Button head)
1x M2x12 (Button head)
3x M2 Nut
1x M3x8 (Button Head) or M3x5
1x M3x5 (Button Head)
2x M3 Heat Inserts (4mmx5mm) (LxOD) - I will include models without heat inserts.

Optional: Thin padding (I used a tool drawer liner from the dollar store).

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

Part Explanation:

Latch Coupler Nutted: Has two slots for M2 nuts to be inserted
Latch Coupler Loose: Has two slots for M2 screw head.
Latch Crank Nutted: Has 1 slot for M2 nut and 1 hole.
Latch Crank Loose: Has 2 holes.
Coupler Spacer: Connects the two couplers together.
Crank Spacer: Connects the two crank pieces together.
Latch Top: Screws into top half of case.
Latch Bottom: Screw into bottom half of case.

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

Comments:

I recommend printing the latches in fine detail (0.1mm or 0.15mm layer height).
I want to redesign the latch system so it locks into place better and is maybe more aesthetic. This is why I made the latches modular.
The case was designed to use some type of liner (at least for the screen), so without any liner, the console may be a bit loose inside.