布洛克海德 5015 高速堆叠式风扇盖

Blokhead 5015 Velocity Stack Fan Cover

2024-04-28 15:50:44

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

布洛克海德 5015 高速堆叠式风扇盖

Summary

Remixed 5015 Velocity Stack Fan Cover to fit the Blokhead Fan Duct.

If you're using a Blokhead with a 5015 fan to print this- or equivalent cooler, you will likely not need supports on the top half of the fan cover.

Supports touching builtplate are necessary for the interior surface of the fan cover, as it is slightly recessed to provide increased tolerance.

Mounting can be accomplished using the one screw and a combination of either:
Hot gluing duct edge to the blokhead
CA gluing duct edge to blokhead

Or my personal favorite- Double sided tape for an easy, semi-permanent install.

PLA is fine. This part won't see temperatures dangerous to PLA.

No functional benefit- just looks cool :D

Print Settings

Rafts:
Doesn't Matter
Resolution:
0.2mm
Infill:
15%
Filament brand:
Any
Filament material:
PLA

Tags

5015 blower Blokhead Petsfang

布洛克海德 5015 高速堆叠式风扇盖

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

MK47 模组道具枪
2023-03-26
Glock 17/34 Solidworks 模型文件
2023-04-21
SATA male THT 15-pin right-angle ATX power connector (3D files, f3d file, and KiCad files included)
2023-08-02
斯坦利杯
2024-01-11
佳能EOS镜头连接接口
2024-01-11

最新模型