WE 格洛克 HPA 适配器

WE Glock HPA Adapter

2024-04-30 10:54:13

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a work in progress, you'll need a small spring and screw for the mag release. For the BB retention I use a small thin o-ring that provides very slight pressure to the BB where the MP5 mag is inserted this ensures that when you pull the mag out all the BBs dont fall out of the glock mag too. The o-ring is put onto the tube inside the adapter that depresses the BB release on the MP5 mag. The HPA input is designed to receive a WE HPA tap. Designed to work with WE Glock mags and adapt them to take MP5 aeg mags. The adapter pictured is printed in petg however I have had better results printing it in abs like resin. You will need to make a BB guide that slides inside the bottom of the glock mag to take it from a double stack to a single stack that way it feeds properly. I didnt save the file for it when I made one for mine but this project has take the back burner for a while so I will post one once I pick this project back up again. Fusion 360 files are included to feel free to remix any of the parts to meet your needs or to improve upon the design!