Spyderco 小型原生折叠刀刻度尺

Scales for Spyderco Lil' Native Foliding Knife

2024-01-15 07:53:45

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Think this is cool? Please click on LIKE.

This is a file for printing your own scales for the Spyderco Lil' Native folding knife.

The design of these scales follows that of the originals pretty closely, though I plan on offering additional versions with other features and differences later on. Unlike my Spyderco Para 3 scales, though, these are .5mm thicker than stock because it was needed for strength around the bolts.

I've printed with 3 different manufacturers' PLA, as well as in PETG, and they all fit fine, but you might have some issues with fit if your printer is not as calibrated as mine (or if it is better calibrated than mine...), so you might need to make minor adjustments with a knife (which, presumably, you have already).

Please post some photos if you print them and use them - even if only temporarily.

You can easily get away with printing at 30% infill, like those scales in the photos, but I'd recommend 100% infill once you have verified that the scales fit when printed from your printer.

The "Show" scale is the side where the Spyderco logo is on the blade, and the "Back" is where the clip is found for right-handed users (though in the photos the clip is configured for a left-handed person).

No matter which way you print these, you will need supports. With Cura 5, at least, 45% zig-zag pattern regular supports (not tree) worked out well, as they were easy to remove. This is very important if you print flipped over 180 degrees so that the exterior of the scale is facing up. I typically print with the scales facing down, which means few supports are needed.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 v2
Rafts:
No
Supports:
Yes
Resolution:
.25mm or lower
Infill:
30 to 100%
Filament brand:
N/A
Filament color:
N/A
Filament material:
PLA or PETG
Notes:
No matter which way you print these, you will need supports. With Cura 5, at least, 45% zig-zag pattern regular supports (not tree) worked out well, as they were easy to remove. This is very important if you print flipped over 180 degrees so that the exterior of the scale is facing up. I typically print with the scales facing down, which means few supports are needed.