智能卡槽
Resizable Card Box
2024-01-15 09:34:44
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This SCAD project is used to produce storage box for your card game. You may add multiple section or use a single one, write custom title to your section and modify the box measurements.
Print Settings
- Printer brand:
Prusa
- Printer:
I3 MK3S
- Rafts:Doesn't Matter
- Supports:Doesn't Matter
- Infill:Depend
- Filament brand:
AMZ
- Filament material:
PETG
Post-Printing
Enjoy!
Nothing more to do
Variable Description
Instruction and description of each personalizable fields
Global:
- inner_width: Take height mesurement of one of your card.
- inner_height: Take width mesurement of one of your card.
Cover:
- overlap_percent: Percentage of the overlap between you box and cover => [20,10,80]
- latch_type: Would you want latch notch on the width side, depth side or both => [0=Both Side, 1=Width Side Only, 2=Depth Side Only]
- cover_loose_fit: If your cards are a bit blunt, using this option will remove the full thikness in the cover part. => [true, false]
- cover_label: If you want to write the game name on top of the box
- cover_label_font_family: Trebuchet, Sukhumvit, Silom
- cover_label_font_size: 6 to 18
- cover_label_angle: 0 to 90
For each section (up to 10 sections)
- section_01_inner_depth: Take depth mesurement of all cards to be in that section.
-
section_01_label = If you want to write something at the bottom of that section.
- section_XX_inner_depth: Take depth mesurement of all cards to be in that section.
- section_XX_label = If you want to write something at the bottom of that section.
Tags
License
CC BY-NC
Resizable Card Box
by themaker001 is licensed under the Creative Commons - Attribution - Non-Commercial license.
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
猜你喜欢
联系我们
邮箱: 289047960@qq.com
热门推荐
-
GPD Win 2 高性能3D工作站2023-04-30 -
最小型Tevo塔拉突拉机械臂30×30风扇安装架2023-05-01 -
Razer Seiren mini ikea灯具模组2024-03-14 -
高架床接口套件2024-03-30 -
无图标 H1 - Heltec V3 外壳2024-04-15
最热下载
-
通用型1/10比例底盘 - DKS基础款2023-03-26 -
可定制像素珠子照片面板2023-03-26 -
GPD Win3 把手型号2023-04-07 -
Delta设置校准为Klipper2023-04-23 -
索尼NP-FW50电池专用外壳（5个装）2024-04-24
最新模型
-
Flick 19E（增强型） - 可使用的玩具枪 - 类似弹弓的橡皮筋枪2025-08-21 -
任意立方体活动关节的一体打印外星人2025-07-19 -
系带3D凉鞋（儿童款）2025-07-16 -
比基尼模型2025-07-16 -
锅盖收纳锅盖放置挂钩-能防止12cm到32cm尺寸的锅盖2025-06-24