连接线缆夹 Kiwi 设计探索者 3 头带

Link Cable Clip for Kiwi Design Quest 3 Head Strap

2024-01-15 17:22:25

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A simple cable clip for the Kiwi Design Quest 3 Head Strap. The clip audibly clicks and locks into place, and can be released by pushing inwards on the bottom piece of the clip, and sliding up. My link cable for the Quest 3 is thick and heavy, and a couple of these clips takes all the pressure off the USB-C port on the headset, as per the photographs.

I printed mine with 100% infill, as they're so small and use such a little amount of PLA, but I doubt that less would cause any issues.

For reference, my link cable is just a touch over 5mm in diameter, but slightly thinner cables should also be adequately supported by these clips.