尼光 4档开关盒固定架，适用于2010至2012款Subaru Outback车型

Nilight 4-gang Switch Box Mount for 2010-2012 Subaru Outback

2024-01-16 01:51:19

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

尼光 4档开关盒固定架，适用于2010至2012款Subaru Outback车型

Summary

As I was installing my roof lights on my 2012 Subaru Outback, I was trying to figure out where to mount the switchbox for them. I discovered that I could remove a cubby from the center console and decided to make a bracket to replace that cubby with the switchbox.

This bracket only holds the Nilight 4-gang Switch Box

Fits:
2010-2012 Subaru Outback
2010-2014 Subaru Legacy

Installation:

Remove the front panel. This video demonstrates it well: https://www.youtube.com/watch?v=6lx1XpflgZE&t=101s
Remove the cubby that comes with that panel via 4 philips head screws. (Save these screws, as this design uses OEM hardware)
Replace the panel with the 3D Printed bracket
Reinstall the front panel with the new bracket attached.

Feel free to ask any more questions you may have in the comments.

Print Settings

Printer brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
Standard Quality - 0.2mm
Infill:
10% Grid
Filament brand:
Matter Hackers
Filament color:
Grey
Filament material:
PETG
Notes:
You could print this in whatever filament you want theoretically, but I recommend something that is heat-resistant if you live in a place like me where the car can heat up on summer days. I would recommend using ABS. I used PETG because I didn't have any ABS.