LMN-3案例分析

LMN-3 Case

2024-01-16 04:30:01

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Hardware Required:
10 x M2*10 bolts
10 x M2 nuts

(Really any reasonable length of M2 bolts will be fine, there isn't any interference.)

This is a case I designed for the LMN-3 open source DAW in a box. The lines in the picture were added in the slicer so they will not show up in the stl files.

This case is designed to be assembled with M2 hardware. I used 10 M2*10 bolts and 10 M2 nuts. There are recesses cut so that the bolt heads will sit flush with the exterior of the case so you may need to edit this if you have different size bolt heads. I included a .step file if you need to import this into modeling software.

LMN-3_Body_Right, LMN-3_Base_Left and LMN-3_Base_Right will need to be printed with support as there are overhangs on each of those pieces to ensure they fit together well. If possible I would recommend you do not print the bolt holes with support as its just annoying to get out and could lead to you damaging the print if you aren't careful.

The LMN 3 Label is currently set as separate bodies as my printer runs multiple filaments. and its easier to change the color of the label if I modeled it that way. I included those letters.

I also added two rubber feet to the bottom of the case just to make it a bit nicer. I got mine off an old HP laptop but any stick on rubber feet will work just fine.