乐高宝箱胶带发射器

LEGO Treasure Chest Tape Dispenser

2024-01-16 10:48:19

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

LEGO Treasure Chest Tape Dispenser

This is a remix of JandeVries' LEGO Treasure Chest and Hugz_aventures' LEGO Brick Tape Dispenser models.

If you would like to make your own customization then feel free to use my Tinkercad model with this link: https://www.tinkercad.com/things/e7rEDO7HNCn-treasure-chest-tape-dispenser

Print Settings

Printer brand:
Creality
Printer:
Ender-3 v2
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
15%
Filament brand:
Any
Filament color:
Any
Filament material:
PLA
Notes:
The base will need supports for the handles and the tape dispenser part.

I printed the lid with it's "back" touching the build plate. This provided better adhesion and required less supports. However, printing in this orientation caused the "studs" on the lid to print malformed (not perfectly round). It's up to you how you decide to print the lid but it will need supports to print properly.

Please see my images for an example of how I printed both the base and lid with supports.

Post-Printing

Attaching the lid to the base

Use two sets of M3x12mm screws and nuts to secure the lid to the base. Please see my images for an example of this.

How I Designed This

I used the online tool Tinkercad to combine the original models together. Additionally, I modified the lid's hinges so that an M3 screw could be used to attach it to the base. I also resized the dispenser tube's width by 1mm (from 22.5mm to 21.5mm) because it was a bit tight when I printed it, however, you may need to adjust it depending on your 3D printer tolerances.

If you would like to make your own customization then feel free to use my Tinkercad model with this link: https://www.tinkercad.com/things/e7rEDO7HNCn-treasure-chest-tape-dispenser