黄色木材滑轮-全双轮移动装置

Yellow Log Skidder-All Dual Wheels

2024-01-16 23:11:28

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A skidder is any type of heavy vehicle used in a logging operation for pulling cut trees out of a forest in a process called "skidding", in which the logs are transported from the cutting site to a landing.

There are three ways to print this.

As single piece:- Please download STL file but there wont be any movements.
Multiple Pieces :- Download 3mf file with Full_dismantled.3mf.BEST QUALITY OUTPUT. Please use the 3mf file for assembly also. CHECK EASE OF PRINTING TITLE BELOW
Combined:- You may use any 3D viewer software like 3D builder in windows to merge components according to your printer and filaments. The sky is the limit for this. You may find a sample file ending with combined.3mf.

EASE OF PRINTING

This model contains parts of 4 colours - YELLOW, BLACK, RED & WHITE. I have seperated these into different plates according to colour and in the optimum print position. Please download and extract the file “Print Plates According to Colour.zip” to make use of them. These plates can be opened in any slicer and printed according to your print profiles. Check the names of the files for the colour to print with.
Print the wheel axles at minimum 60% infill Density
The 7th and 8th Plates can be printed with filament change for the brand names on the top, if you choose so.

ASSEMBLY OF MODEL

This is done in 5 steps. Please follow the steps.

ASSEMBLY OF GRAPPLER & ARM
ASSEMBLY OF FRONT CARRY
ASSEMBLY OF MAIN BODY
ASSEMBLY OF CABIN
MATING OF PARTS

STATIC DISPLAY LOCKING

The are specific mechanisms provided by which various links can be locked in different poses. Please use a small piece of filament to lock the links as shown in the instructions below

Movements Included

Grappler Full Movements
Front Arm Full Movements
Front Carry Steering
Rear Bucket and Engine Bay Cover
Rotating Chair

NOTE The tolerances to some elements are zero which has been intentionally provided to friction lock the elements while not in movements. You may have to fine tune the tolerance from your end using scaling function in slicer to ensure good fit without compromising movements. This also applies for the pins that make rotation possible between elements. Please proceed with printing all the pins after testing printing a pin and testing the fit of a joint. You should be able to find the adequate scaling factor with this.

The main body is made hollow to ensure filament savings.

Supports should be provided as required.

Appreciate the makes uploads. Open for suggestions.