AEP-M16磁感应元件适配器

AEP to M16 mag adapter

2024-01-17 05:29:59

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is an AEP (Airsoft Electric Pistol) to AR15/M4/M16 mag adapter.

Fits CM.030, CM.122, CM.123, CM.126, CM.127, CM.132, CM.135

For the mag latch axle you can use 3mm bolt. And for returning spring of the mag latch I use pen spring cut in half (for details see the images of one of my other models - https://www.thingiverse.com/thing:5935998).

When reloading you can tilt the replica horizontally so you do not lose many BBs.

For airsoft use only!

Any thoughts and recommendations will be appreciated!

If you like my work you can buy me a coffee - https://www.buymeacoffee.com/mladendeni.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 S1 Plus
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
30%
Notes:
I prefer to print it with brim just for the peace of mind.

It's 176mm tall, so it fits in any 20cm printer or bigger.
I added support blockers on the 2 mag latches holes to prevent weird supports (see picture).
The inner bottom support is big one but it falls pretty easily (depending on the quality of your filament). If a persuasion is needed you can stick a screwdriver in the mag latch hole and push the support down.

The mag release latch is printed as on the image, so that we have a smooth surface locking the mag.

If your M4 mags are a bit different you can always play with the mag release piece contact surface and adjust it accordingly (there are many different manufacturers which deviate slightly).