简单设计的扩散器，适用于25mm蜡烛
Simple Diffuser for 25mm torch
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
this diffuser fits on thosde $3 AAA 9-LED torches that are available everywhere.
I originally designed it to adapt the torch to a Magnifier that has a damaged light. having found that the replacement torch part was about Au$200. it should fit almost any torch with a Face diameter of 25-27mm . I will drop a few more sizes as i get a chance.
Enjoy!.
Print Settings
- Printer brand:
Creality
- Printer:
K1
- Rafts:Yes
- Supports:Yes
- Resolution:any
- Infill:15% but so thin it doesnt matter.
- Filament brand:
Generic
- Filament color:
White
- Filament material:
PLA
- Notes:
Used a Brim to secure printout to the print bed, as it is so thin, the printer pulled it off halfway.
this could be printed in any colour. for night vision, or events.
How I Designed This
Used tinkercad to merge some shaped to give the angled front.
Tags
License
Simple Diffuser for 25mm torch
by PeskyGeomonkey is licensed under the Creative Commons - Attribution license.
相关内容
猜你喜欢
联系我们
最新模型
-
F1赛船3D模型固定文件2024-05-08 -
3.5寸硬盘驱动器到四个2.5寸硬盘驱动器适配器（Nox Hummer Spark）2024-05-08 -
泳池盖卷帘3D模型2024-05-06 -
Hills 双层日常衣架 - 框架盖2024-05-06 -
SD卡与USB设备支架2024-05-06
最热下载
-
通用型1/10比例底盘 - DKS基础款2023-03-26 -
二十面体骰子模型2024-03-29 -
BlueSCSI v2 SPARCstation驱动器支架及密封环2024-04-14 -
厨房水槽滤网过滤器2025-06-05
