Makita电池适配器（专为XH-M609电压截断板设计）

Makita Battery Adapter to Suit XH-M609 Voltage Cutoff Board

2024-01-17 13:16:59

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Remix of: https://www.printables.com/model/67118-ts100-power-adapter-for-makita-batteries

Remix of Noloxs' adapter - with this remix the adapter now accepts a XH-M609 programmable voltage cutoff board.

Parts Required:

Makita Terminal: I used 643852-2 but 644808-8 should also work
XT-60 connector
XH-M609 circuit board
4x 6mm 4G self tapping screw - to secure circuit board
4x M4 Countersunk screws - to secure two halves of adapter
Small length of wire for connecting everything up
I removed the two Green terminal clamps on the XH-M609 and soldered the input and output wires directing to the board to allow for some more room.

When printing you can choose either the captive nut base or thread insert base depending on what you prefer.

Makita电池适配器（专为XH-M609电压截断板设计）

朋友，你觉得上面这个模型，属于下面的哪个分类？