HORDE/GUARDSMAN MOVEMENT TRAYS

2024-01-17 13:47:22

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Compact movement trays for horde-oriented armies. All movement trays have magnet holes for 5x1 mm Circular Neodymium Magnets. I would advise using tape to secure the magnets instead of glue if you want to reuse them for other projects.
I've also made a new type of tray called "Nexus Movement Trays" using magnets to interlink them. However, they are experimental since the 5x1 mm magnets are only strong enough to slide them along instead of picking them up.

The configurations for these trays are as follows:
-25 mm
-4x, 5x, 8x, and 10x
-28 mm
-4x, 5x, 8x, and 10x
-Nexus (Experimental)
-25mm, 28mm, and 32mm

I found that the sweet spot is using several 4x configurations for a standard infantry blob (20 men) because you get more wiggle room to slide the models around all types of ruins. If not, the 10x should suffice. The 8x Configuration is for the standard infantry squad with a heavy weapons base, I did not include an attachment for the heavy weapons base because I would have to account for two sizes, the model was easy to pick up already, and I wanted my movement trays to be used for other armies as well.

If you are having a problem with the trays not sliding smoothly on a mat, apply tape to the bottom. You would usually get this problem if you use a raft for bed adhesion on FDM.

Feel free to share a comment about the design. Feedback is always welcomed.