可定制发呆玩具
Customizable Fidget toy
使用说明
- 所有模型资源均由用户上传分享,内容来源于网络公开资源
- 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
- 模型将通过邮件发送(5分钟内自动发送),感谢理解带宽压力,超过1小时没收到,请联系我们
关于费用
我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!
扫码手机访问
抖音私信 @jobsfanSummary
Support my work & get access to commercial licence on my Patreon You can also follow my work on Instagram for more.
Ok here is my take on a simple yet elegant/premium fidget toy.
The main gimmick is the fact that you can easily change the cover of the fidget with an other one, so you're able to fully customize it.
Here is a video on how to do it:
There are multiple covers available, most of them are multicolor but achieved thought changing filament at a certain layer so doable in any printer.
All the instruction for each cover are down in the description.
More covers to come here and on my Patreon
You can also easily make more custom using the blank cover model (just called COVER)
It's easy to print, easy to assemble, here is how:
The only thing needed is 3x6 magnets that you can find here: https://geni.us/fidgetmagnet
Smaller magnet would work but I found that 3x6 had the best feel to it.
Input and suggestions are always welcomed
Hueforge ID #16426
Covers Instructions
Lionking
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Charcoal Black
PLA Orange
PLA Yellow
PLA White
!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!
Swap Instructions:
Start with Charcoal Black
At layer #7 (0.64mm) swap to Orange
At layer #14 (1.2mm) swap to Partly Sunny Yellow
At layer #18 (1.52mm) swap to White for the rest.
Mrbl (Moss like texture)
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Black
PLA Fluorescent Green
PLA Grass Green
PLA White
!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!
Swap Instructions:
Start with Black
At layer #12 (1.04mm) swap to Fluorescent Green
At layer #17 (1.44mm) swap to Grass Green
At layer #22 (1.84mm) swap to White for the rest.
Hexagons
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Black
PLA Cobalt Blue
PLA Lilac Purple
PLA White
!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!
Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Cobalt Blue
At layer #14 (1.2mm) swap to Lilac Purple
At layer #18 (1.52mm) swap to White for the rest.
Boat
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Black
PLA Cobalt Blue
PLA Lake Blue
PLA White
!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Cobalt Blue
At layer #12 (1.04mm) swap to Lake Blue
At layer #18 (1.52mm) swap to White for the rest.
Logo
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Black
PLA Lilac Purple
PLA Orange
PLA White
Swap Instructions:
Start with Black
At layer #4 (0.4mm) swap to Lilac Purple
At layer #10 (0.88mm) swap to Orange
At layer #14 (1.2mm) swap to Jade White for the rest.
Couple
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PETG JAYO Black
PLA PolyLite Orange
PLA Protopasta Partly Sunny Yellow
PETG JAYO White
!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!
Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to Orange
At layer #10 (0.88mm) swap to Partly Sunny Yellow
At layer #14 (1.2mm) swap to White for the rest.
Tags
License
Customizable Fidget toy
by Shapend is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
相关内容
猜你喜欢
联系我们
热门推荐
-
DIY手工制作情绪灯光——Solumen,由SolipsFilm设计2023-03-26
-
通用型1/10比例底盘 - DKS基础款2023-03-26
-
外星人餐馆 2402023-09-10
-
耳机挂钩2024-03-22
-
FPV遥控纸飞机(机身)STL 3D模型2025-09-16
最热下载
-
鸡蛋绘画机迷你(Eggbot衍生版)v1.12025-07-16
-
凯弗·鬼魂追踪者2024-01-18
-
王国之泪TOTK光龙塞尔达传说2024-04-20
-
俄亥俄州日全食针孔观察器2024-05-03
-
Flick 19E(增强型) - 可使用的玩具枪 - 类似弹弓的橡皮筋枪2025-08-21
最新模型
-
跨维度外推器 - CW的闪电模型2024-05-08
-
蝴蝶刀-一体打印(更大刀刃)2024-05-08
-
制作者大会头骨边缘2024-05-08
-
Nemesis侧边替换打印2024-05-08
-
口技演员假人头2024-05-06