SP404音响3D模型

SP404eaker

2024-01-18 03:22:21

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a speaker for the SP-404mkii it is not finished as of yet as i want to add a lip to grap on to the SP so it sockets in, to make it more sturdy, i want to add some kind of rubber grommet to the jacks so they have some wiggleroom to make sure that im not putting strain on the female connecters, i want to add routing for the midi jacks and the usb, and i have to fix the threading for the jacks as i didnt measure my jacks threading

so you have been warned, if you want to make one yourself be prepared for some kinks,
for the amp, speakers and battery i just searched for wooden grain speaker, i know they come in different varieties, some called "w5 shock bass" an have also seen some named ft-4002, im pretty sure that all of them would fit my design here
i cut a cardboard ring and used for the gasket for the speaker at they dont have any foam gasket or anything like that

i will update this project

here's a small demo https://youtu.be/gcbnA7dCk8M