橡皮ducky挂钩
Rubber Ducky Hitch
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I scaled up the ducky, removed the hole, and inserted the hitch portion from the claymore hitch. I have printed this myself with the settings listed, though you can probably change them significantly as I wanted mine a bit more rugged and to ensure that there was minimal drooping on the bridging sections. Please check dimensions prior to printing, as the hitch section was slightly too large on the file I printed (I have modified the file so that it should be ~51.5mm OD).
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3 Pro
- Rafts:No
- Supports:Yes
- Infill:10%
- Filament brand:
Any
- Filament color:
Yellow
- Filament material:
PLA
- Notes:
I used supports everywhere, but my machine would probably bridge the box without too much trouble, so if I were making another one I would probably just use support from the build plate. The bill may or may not need support (it was used for mine).
Tags
相关内容
联系我们
热门推荐
-
Cali Cat: 加州校准猫2023-03-26 -
超旋涡轮机 3D 模型2024-01-18 -
藏身载具：VKB战斗者装备2024-03-18 -
Ender-3电源下部支架2024-04-22 -
相对而言很小的小矮人齐柏林飞艇2024-05-05
最热下载
-
Neptune 4 / 4 Pro 的 Cura 切片配置与打印建议2024-05-02 -
幻想磁力2024-05-03 -
用于Raspberry Pi高质量摄像头的D型安装适配器2024-05-08 -
塑料扣（3D打印无需支撑设计）2024-05-08 -
螺旋锥形手玩具（全新）2024-05-08
最新模型
-
圣诞主题旋转木马2024-05-08 -
简易蘑菇模型2024-05-08 -
装饰艺术风格灯罩适用于GRÖNÖ灯2号2024-05-06 -
适用于Acetech Brighter C的枪口消音器2024-05-06
