Supernote A5X 夹层装载框
Supernote A5X Folio Mount
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Supernote mount for the A5X. This locates and locks in place the device at the rear into a folio or cover
This took a numbers of designs before I came to this working solution. The overhang is the tricky parts and need supporting. I tried various support methods before I found one that enabled them to be removed without causing damage or splitting the overhang from the body
Printed using PETG for extra strength
Although this fits my Supernote well it has not been testing inside a folio as yet. Please use with caution to ensure it doesn't snap, it is very thin!
Print Settings
- Printer brand:
Voxelab
- Printer:
Aquila S2
- Rafts:Yes
- Supports:Yes
- Infill:100%
- Filament brand:
eSun
- Filament material:
PETG
- Notes:
Supports are a must to stop the droop of the overhang. Removing them afterwards can be tricky
Printed on my Aquila C2 printer
Post-Printing
Tags
相关内容
猜你喜欢
联系我们
热门推荐
-
血魔2023-03-26 -
安装电缆固定装置2023-05-09 -
探测器固定架 v42023-06-04 -
Ender-3电源下部支架2024-04-22 -
蒸汽战甲断路器球形支架适配器2024-05-02
最热下载
-
开源 1:10 四驱竞技型 RC 车2025-07-08 -
鸡蛋绘画机迷你（Eggbot衍生版）v1.12025-07-16 -
用于RRD通用型70182电机的mayrc maytech桅杆夹2024-04-20 -
Neptune 4 / 4 Pro 的 Cura 切片配置与打印建议2024-05-02 -
用于Raspberry Pi高质量摄像头的D型安装适配器2024-05-08
最新模型
-
裸女站立2025-07-16 -
为我的教学2024-05-08 -
浴室里的男人建模2024-05-08 -
线轴支架2024-05-06 -
Twizy门锁橡胶件 3D模型2024-05-06