超级笔记 DIY 笔筒装填支架（兰尼野外系列）

SuperNote DIY Pen Refill Support (Lamy Safari)

2024-03-24 07:24:25

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I have seen a lot of hacked together solutions for building a SuperNote DIY pen, but wanted something a bit more purpose-built. I made this a little longer than necessary so it would potentially fit other pens - you can trim it to size. You'll probably need to drill out the interior elephant's foot in the hole, so the SuperNote refill will fit.

Follow the instructions at Ratta's website (https://support.supernote.com/en_US/hardware-repair/how-to-safely-make-a-diy-supernote-pen) to adjust your refill (including trimming if necessary). I had to trim mine to fit the Lamy Safari.

It could probably be thicker, but I wanted it to be compatible with other pens, and it already fits nicely inside the top part of the Lamy so the SuperNote refill doesn't move laterally inside too much. I included my rough sketch of the design with measurements, so if you wanted to remix it for another pen you have a place to start.

Print Settings

Printer brand:
ELEGOO
Printer:
ELEGOO NEPTUNE 4 Plus
Rafts:
Yes
Supports:
No
Resolution:
.15
Infill:
15%
Filament brand:
Elegoo
Filament color:
Orange
Filament material:
PLA
Notes:
This is a pretty basic print; you have a lot of flexibility in your settings, I would expect. I printed it vertically, wide part down, with a brim. You need to trim the brim off, and drill out the hole a little to clear the edges.