水平-垂直调节头部
pan-tilt head
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a first prototype for a motorized wrist (pan-tilt), as part of my research at the Rijksakademie.
2 motors can comtrol the Right and Left [part-001] bevel gears via GT2 timing belts
Rotations on the same direction will cause [part-004] to spin in tilt mode, while movements in opposite directions will produce pan movements. (combination of both are possible)
[part-006] attaches with screws to the [part-004] bevel gear, through the [part-005] mount, via a 50x65x7mm ball-bearings. (https://www.amazon.nl/dp/B09SCN3DQ7?ref=ppx_yo2ov_dt_b_product_details&language=en_GB&th=1)
10x26x8mm ball bearings connects [part-004] and the 2 [part-004] with the cener piece [part-002], using 10 mm rods.
Threaded Inserts allow the use of M3*4.6x5.7mm screws.
Overview and Background
This work is part of my Tech-Fellowship residency at the Rijksakademie.
Lesson Plan and Activity
Work Plan
This piece is part of a mechaniccal camera rig.
相关内容
联系我们
最新模型
-
Injora Trx4 身体支架2024-05-08 -
灭霸4U控制器底座2024-05-08 -
花环戒指2024-05-08 -
Taco Bell国际象棋套装：骑士版本2024-05-08 -
Jenga盒子2024-05-06
最热下载
-
模块化抽屉 2.02023-03-26 -
参数化的两部分模具生成器（用于OpenSCAD）2023-03-26 -
吸血鬼之夜2024-01-15 -
FFBeast仿真飞行器模拟轮部件2024-04-19
