阿波罗12号 SCE 辅助开关

Apollo 12 SCE to AUX switch

2024-01-19 11:47:38

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a piece of art remembering the lightning strike incident of Apollo 12 and how John Aaron saved the mission on November 14, 1969. Read the whole story here: https://www.vice.com/en/article/xyw4kz/john-aaron-apollo-12-curiosity-luck-and-sce-to-aux

Note that the actual Apollo 12 command module instrument panel is slightly different from this model as you can see on this page and the attached photo: https://www.si.edu/object/instrument-panel-trainer-command-module-apollo%3Anasm_A19770320000

I did not want to create the whole switch group, so I created this model following the style of the original panel, but focusing only on the SCE switch.

Although there are existing models, I found them either difficult to print, paint or they were not actual switches. This model needs actual screws and an ON-OFF toggle switch. The guards are 3mm diameter wires bent to the exact dimensions using the attached Wire bender tool, so no tricky printing is needed.

Parts:

Print the Base model without supports, then remove the sacrificial layer from the switch hole.
Print 4 pieces of the Riser model. Depending on your bed adhesion, you may need to use brim.
Print the Wire bender tool model.
Print the SwitchTip.
2 pieces of 3mm wire and form it around the Wire bender tool.
4 pieces of slotted, dome head screws for the corners. You may need to cut them to length or drill bigger holes into the printed model to fit your actual screws.
2 pieces of slotted, dome head screws for the middle holes.
IKEA Sannahed 25×25 cm picture frame. You can use the screws in the corners or the middle to mount the base to the picture frame.
ON-OFF toggle switch for 6mm holes.

In case you have a Silhouette cutting machine you can use the attached .studio3 file to cut the labels. If not, you can re-design the labels with your preferred tool using Franklin Gothic Medium font.

I attached the model in Fusion 360 and STEP format, feel free to customize and share your remixes!

Enjoy!

Acknowledgements:

The SwitchTip.stl file is used from Genetoye's Apollo SCE to AUX model on Thingiverse: https://www.thingiverse.com/thing:4686017/files Thanks for creating and sharing that model.