冻结的帝国无人机陷阱高版

Frozen Empire Drone Trap Version 2 Tall

2024-02-04 13:06:27

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a remix of graam3d's ( Graeme Peter's) original drone trap design. I added the use of 3D printed S450 quad arms. This model currently will not work with off the shelf S450 quad arms. I am working on updating the models for fitment of both 3D printed and off the shelf S450 arms. Have fun and make yourself a Ghostbusters Drone Trap. Personal use only, not for sale or for commercial use. I reserve the right to alter and modify the model as needed with updates when required. This model was redesigned to make the prop arms an equal distance apart. The trap box was also made taller to fit electronics and the rear arm mounts were moved up to be more movie accurate.

Holes in the chassis and rear box are designed to be used with M3 brass inserts for 3M screws.
https://a.co/d/eWg115i

Motors I used.
https://a.co/d/4Kz0rj9

Props I used.
https://a.co/d/8BVIAuA

S450 Quad Arms remixed from villamany
https://www.thingiverse.com/thing:1206960

Print Settings

Printer brand:
Creality
Printer:
K1
Rafts:
No
Supports:
Yes
Resolution:
.22
Infill:
15
Filament brand:
ESUN PLA +
Filament color:
Black Yellow Red
Filament material:
PLA
Notes:
You will need a large format printer for the chassis, I printed this one a K1-Max with a 300x300 bed. You Will need supports for the Chassis under the rear arms and the cartridge. I recommend slim trees for the cartridge, 85% over hand, 8% density.