Shelly 1PM Mini Gen3 GIRA插座固定架
Holder for Shelly 1PM Mini Gen3 in Gira Socket
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Hold a Shelly 1PM Mini Gen3 securely in place on the back of a Gira socket. The screws that come with the Gira socket fit into the holder and secure it on the back. On the side there is space for a 3x Wago clamp to wire the neutral line to the Shelly and the socket.
Note: I'm not an electrician and don't recommend you use this. Any changes in your electrical setup should be done by a qualified electrician.
The holder has two small holes in the back that help you to get the Wago clamp and the Shelly back out of it, once squeezed in.
Print Settings
- Printer brand:
Bambulabs
- Printer:
Bambu P1S
- Rafts:No
- Supports:No
- Resolution:0.2mm
- Infill:25%
- Filament brand:
Bambu Basic
- Filament color:
black
- Filament material:
PLA matte
- Notes:
If printed on the back, no support is needed.
Tags
License
Holder for Shelly 1PM Mini Gen3 in Gira Socket
by kongo09 is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
相关内容
猜你喜欢
联系我们
热门推荐
-
Raspberry Pi外壳2023-03-27 -
Na Miata 240SX 原厂经典车型 + 后灯装饰插件2023-05-10 -
PGO BR200 验车速度传感器盒2023-08-09 -
自行车钥匙扣2024-01-05 -
Smallrig F40 跟踪焦点齿轮2024-04-23
最热下载
-
数字世界12342024-01-03 -
斯坦利杯2024-01-11 -
GTA 5 大地图模型2024-04-21
最新模型
-
丰田22RE发动机Starer电机2025-08-08 -
一体打印行星齿轮2025-07-15 -
兔女郎半身像2025-07-15 -
私密羞羞娱乐骰子2025-07-15 -
锅盖收纳锅盖放置挂钩-能防止12cm到32cm尺寸的锅盖2025-06-24