Shelly 船坝 / 支架（适用于Mini、Plus和Wave）
Shelly dock / jig for Mini, Plus and Wave
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
The Shelly Mini dock that is utilised for testing Shelly Mini devices, as demonstrated in the video linked here: https://www.youtube.com/watch?v=SRrmR5CEWoM&t=2096s
PETG filament is recommended due to its enhanced flexibility and better fire resistance compared to PLA or ABS.
While both parts of the dock are designed to be printed without supports, it is advisable to use rafts for printing the front part to have better adhesion.
Additional printing settings may vary depending on the filament and the printer itself. I personally printed it using a Creality Ender 3 within a custom-built enclosure.
If you're loving the dock, I would be thrilled if you could share your appreciation by a small donation on https://Paypal.me/IgorMx
Post-Printing
After printing the parts 5x or 7x Positioning pins and 2x allen screws & bolts are needed. The pins size 31.5mm can be ordered from aliexpress: https://www.aliexpress.com/item/32950720712.html?spm=a2g0o.productlist.main.7.48b62f9b2TV6Vl&algo_pvid=f58e4ebb-8fce-4f94-a0d2-90ce006aa16e&algo_exp_id=f58e4ebb-8fce-4f94-a0d2-90ce006aa16e-3&pdp_npi=4%40dis%21BGN%2116.91%2113.36%21%21%2167.03%21%21%402103243417000477929315618e92f0%2166373024225%21sea%21BG%21713110962%21&curPageLogUid=SxIyXVjeumak#nav-review
While the screws used are the allen screw M3x20 DIN 912 with the corresponding nut M3 K8 DIN 934
The best practice to weld the cable on the Pin is:
- Position the pin to the bottom part of the print
- With a marker mark the position which is below the plastic Pic1
- once you have the mark sold on the cable and insulate it with heat-shrinking tube to prevent short circuits Pic 2
- repeat this for all of the pins, position them on the bottom part
- insert the screw in the front part and make it pass trough
- connect the two parts securing it with the nut
- you're done :)
Tags
License
Shelly dock / jig for Mini, Plus and Wave
by Magix3Design is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
联系我们
最新模型
-
线框无心2024-05-08 -
装饰风瓶2024-05-08 -
尼基塔钥匙扣模型2024-05-06 -
狐狸粉尘密封压机，直径36毫米2024-05-06 -
汤马霍克 ASG32 4.44米 42毫米鼻部切割模板2024-05-06
最热下载
-
沃帕尔六足行走机器人2023-03-26 -
参数化的两部分模具生成器（用于OpenSCAD）2023-03-26 -
原始控制舱2024-03-25 -
二十面体骰子模型2024-03-29
