32mm工业底座顶部件

32mm Industrial base Toppers

2024-02-05 03:25:03

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

32mm Industrial Base Toppers

I needed a thin base topper that I could glue to the top of a fender washer. I line a tote with rubberized magnetic sheets and the minis stay upright. Well, as long as you don't tip the box over.

I also added a presupported file. I have no guaratees that these will work for your printer, but they do mine. Of course, I am using a DLP printer. If you have an FDM printer, they should still work but don't use the presupports.

This can be used for miniature table top games set in a Dystopian, Modern or Future World. This can be used for RPGs, table top miniatures games, dioramas, or photography scenes. The sky is not a limit.

Can be used for games like Pulp Alley, Alternity's Edge, 5 Parsecs From Home, Cyberpunk, Stargrave, Fist Full of Lead, This is Not a Test, Zona Alpha etc.