3D模型中的颜色样板

Filament Color Swatches

2024-02-05 07:38:12

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I created these color swatches to give myself or others a quick easy way to view all of my available filament colors/types. I designed various features on these swatches to allow me to see how the material looked on different geometries and provide material detail to help me remember how that material looked before starting a project.

Some features on the swatches include:

The smooth bend at the bottom of the swatch. This allows the user to feel the blended edge while showing how the color of the material looks on various curves.
The 5mm cylinder at the bottom left of the swatch. This allows the user to see small debossed text in a 5mm extruded cylinder.
The rectangular flat surface at the center of the swatch. This location was left blank to allow for additional labeling of the swatches.
A small thumb indentation to hold the swatches at the bottom right of the swatch.
A 1.75mm filament sample display near the top right of the swatch. This is a small location to view the “Raw” filament to compare it to spools of filament. (note - “Raw” filament may need to be glued into this holder)
Keyring hole at the top right of the swatch. This is just a hole to allow these to be put on some type of large key ring.
The top left of the swatch is designed to display material information.
The top side of the swatch shows a short description of the material allowing the swatch to be identified from the side.
The left side of the swatch shows a small unsupported overhang test.
Note:

Due to material availability, I only created swatches based on material I had at the time. For any other swatches, a blank version was created allowing someone to place a label in the blank location, identifying the material.
All prelabled swatches are created for Bambu Lab filament