3D模型中的可调节跟踪引导装置

Trace guide adjustable

2024-03-28 02:56:29

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

In order to adjust the pen a bit more, I splitted the original part to two separate parts - they can be connected with the help of an m4 (or any other one that fits) screw.
I also changed the rounded part to a more pointy edge, in order to get in tighter corners.

I also pulled the shell a bit lower, in order to trace more flat parts of a few milimeters.
And the last change is an additional cover, which helps to adjust the tip of the pen to both edges (edge in front as well as bottom). With the help of the cover, one can make sure that the tip of the pen reaches the full front and the bottom. By pushing the pen tip to the foremost corner in the cover, the tracing will be as accurate as possible, as the tip will be parallel to the trace guide edge.