CPAP佩戴架，带固定带孔和挂钩支撑片
CPAP Holder with strap holes and command hook plates
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I wanted a combination of improvements for the CPAP holder by JayceFyrestorm, and so I basically combined the improvement ideas from servel333 and added plates for the hook to be mounted with command strips, as well as Debay777 and added holes to thread velcro to hold the hose in place. I also made sure that the screw holes were still able to be used just in case. Uses 2 medium size command strips if used.
Print Settings
- Printer brand:
Creality
- Printer:
Ender-3 V3 KE
- Rafts:Doesn't Matter
- Supports:No
- Resolution:2.0
- Infill:50%
- Filament brand:
Sunlu
- Filament color:
White, but literally doesn't matter
- Filament material:
PLA
- Notes:
Printed at 50% infill with Cubic. Wanted a little extra strength than the standard 20%, but honestly, 20% is probably fine. Also I printed with and without supports and they’re almost exactly the same, but YMMV. It uses the medium size command strips
Tags
License
CPAP Holder with strap holes and command hook plates
by rampersandon is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
相关内容
猜你喜欢
联系我们
热门推荐
-
特斯拉 Mini 3 Pro 无线遥控自行车支架2023-03-26 -
地球巨人（加入我们的 Patreon）2023-03-26 -
Aquara壁安装支架2023-04-26 -
车用干燥风扇盖2024-01-16 -
Ender-3电源下部支架2024-04-22
最热下载
-
Toyota 22RE发动机扩展套件2023-03-26 -
3D模型：Easier Print LTT螺丝刀拉拔器2024-01-14 -
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21 -
克利普施 Promedia 2.1音量Pod模拟机器架（铝制支架）安装基座2024-04-29 -
艺术雕像（女性）2025-07-16
最新模型
-
10ml注射器活塞2024-05-08 -
blink门铃钥匙2024-05-08 -
Scirocco MK2 离合器踏板回位指南2024-05-06 -
垃圾桶固定扣2024-05-06 -
FAN SHROUD FOR PWNCNC VFD2024-05-06